Image Alt

TYPE M – 333

If you want additional information, please feel free to contact us.

TYPE M – 333

• Dimensions: 400 x 245 mm
• Cover dimensions: 335 x 205 mm
• Weight: 2.5 kg
• Slat spacing: approx. 335 mm
• 14.5 tiles are needed for 1 m² of roof.
• According to SRPS EN 539-2, in terms of frost resistance, it corresponds to zone B.

• Depending on the climatic conditions, the slope of the roof is projected, but not less than 22°. The roof is covered from right to left, starting from the eaves towards the ridge of the roof. Move each next row by half the width of the tiles (tiles can be installed straight or diagonally.

• In the case of a slight slope of the roof plane of less than 22° and the use of the attic space, the use of roofing foil is mandatory.

• If necessary, it is possible to fasten the tiles to the slats by riveting or tying them with wire.

SPECIAL PIECES OF TILES

Antenna tile AC-333

Snow protection tile SC-333

Ventilation tile VT-333

End left tile ZL-333

End right tile ZD-333

Half-tile PC-333

Face plate FP-182

Three-pronged groove - TKS 182

Groove M-185

End groove ZSG-182

Transition groove PS-182

Trokraki žljebnjak - TKS 182

Summary catalog of coarse ceramics by Toza Marković.

Features of finishing and special pieces for M-333